Finding the Right Flag for You
We offer 5 sizes to choose from and 2 distinct types: Stencil or Solid as well as many colors and finish options to help make the selection process easy.
Photo Credit: Phil Grosvenor
SS-30
SOLID/STENCIL
The ultimate flag for luxurious yachts, large cruisers and sport fishing machines to from 35′ to 60′ in length.
SS-20
SOLID/STENCIL
Ideally suited for most center consoles, European cruisers, offshore fishing boats from 26′ to 34′ in length.
SS-16
SOLID/STENCIL
Ideal for runabouts, center consoles, speed boats and skiffs ranging from 18′ to 25′ in length.
Your Flag, Your Way
CUSTOM SIZES ARE AVAILABLE UPON REQUEST
If you have a custom idea just send us a message – our design and graphics department can make it happen.
Specifications
All of our products are constructed of solid welded marine grade aluminum and powder coated to marine grade standards (sand blasted prep, one coat of primer and two coats of top coated powder).
SS Series Size Chart (Solid & Stencil)
SS Series of Flags Size Chart (Solid & Stencil)
SuperSport (6`` and 10``)
SuperSport 16``
Tuna Tower 16``
SuperSport 16`` Extreme
Roswell Universal Plate for SS-16
SuperSport 20`` Fixed Base
SuperSport 20`` Fold Down Base
Double Flag 2010 Stencil & Solid Fold-Down Base
Tuna Tower Double Flag
SuperSport 30`` Fixed Base
SuperSport 30`` Fold Down Base
SuperSport 30`` Fold Down Base with all options shown
Double Flag 30``/16`` Stencil & Solid Fold-Down Base
PlashLights LED Light Strips
As a courtesy to our customers who have elected to include PlashLights LED light strips with their purchase, Fast-Flag LLC will install the LED strips as needed with PlashLights special adhesive silicon designed specifically to work with the material make-up and composition of the LED light strips. All wires have been inserted into and through the flags mast and coiled up. Fast-Flag LLC recommends that all work be performed by a qualified/licensed marine technician. Please save original packaging for future reference and warranty purposes.
Optional Backer Plate
This backer plate is intended to provide additional support should you require it per your boat’s construction methods/material. Please note that in some cases, depending on the existing installation conditions of your boat, available access, and the desired location of your Fast-Flag, some customization may be required/necessary. For this reason, Fast-Flag LLC recommends that all work be performed by a qualified/licensed marine technician. Feel free to contact Fast-Flag for further information as needed.
Cleaning and Caring for your Flag
IMPORTANT – PLEASE READ: Always wash and thoroughly rinse your flag with clean fresh water and mild soap using a soft washcloth or sponge. Never use harsh detergents, abrasive cleaners, or scrub brushes as these may cause micro scratches which may eventually damage the surface allowing the intrusion of saltwater to migrate between the finish and aluminum. Once this occurs, it is impossible to remedy as salt water promotes corrosion – oxidizing with the aluminum causing further damage. With proper care and maintenance, your flag will last for years.
For this reason, once our flags leave our facilities, we cannot warrant our flag products against incorrect installation, modifications, aggressive chemicals, abuse, misuse, neglect-lack of care/maintenance as well as wear and tear from environmental conditions.
Notice: With all Fold-Down Bases, regularly inspect, clean and lubricate hinge pins to reduce/minimize corrosion – especially in salty marine environments.
Hand tighten aluminum knob.